This is as easy as it gets for saving energy around the home and reducing your annual electricity bill by around 10%!

The Motion Sensor PIR Light Switch leaves us with no excuse to leave lights on unnecessarily around the house. This eco friendly light switch senses when to turn on your lights - when you're in the room - and turns the lights off when you're not. The motion sensor PIR light switch is proven to reduce 128 hours of unnecessary lighting per year in an average home and should save 10% of the electricity you use on lighting in the home each year.

This clever device will only make the lights come on when it's dark, thanks to its adjustable sensor. The sensor covers 180 degrees by 8m long. There is no on/off button as the DYB switch sensor takes care of that and you can adjust how often it checks for movement before switching off the lights. The Motion Sensor PIR Light Switch saves energy with all light bulbs, including energy saving lamps. This light switch represents the very latest in smart ways to save energy and takes around five minutes to install, it really couldn't be easier!

Specifications

Supply voltage: 230VAC 50Hz

Permissible loads: 40 - 500W for incandescent light 40 - 150W for low voltage halogen light 18 - 150W for fluorescent light with electronic ballast 15 - 150W for electronic PL lamp (Philips, Osram only)

Light on Time: Adjustable from about 6 seconds to 12 minutes Lux:

Fully adjustable light level sensitivity for sensor to be activated at the desired brightness in daytime

Detection range: Adjustable up to 8m (20 degrees C)

Detection Angle: Up to 180 degrees (20 degrees C)

Fuse protection: 3.15A, 5 x 20mm changeable

Manual switch: OFF / AUTO / ON

Operating temperature: -10 degrees C ~ 45 degrees C

Environmental protection: IP30