- For use with LED impulse meters and Smart Meters*
- 1 x Transmitter and Optical Reader
- Operates on C2 wireless technology
- Compatible with TREC and ENVI, for dynamic Energy Now Data
- Compatible with all EnviR for dynamic Energy Now Data, and Meter Read Data
Loading... Please wait...- Home
- Saving Energy
- Current Cost OptiSmart Reader
- Home
- Current Cost Energy Monitor
- Current Cost EnviR Energy Monitor
- Current Cost OptiSmart Reader
- Home
- Current Cost Energy Monitor
- Current Cost Data Interface
- Current Cost OptiSmart Reader
Current Cost OptiSmart Reader
Price:
£24.95
SKU:
CC-OS
Brand:
Current Cost
Weight:
0.50 KGS
Availability:
usually shipped within 24 hours
Shipping:
Calculated at checkout
Current Stock:
3
Product Description
Current Cost's OptiSmart technology, for use with LED impulse meters and Smart meters.
Technical Details
* It is vital that before purchasing any OptiSmart product you confirm it is compatible with your meter. Please visit http://www.currentcost.com/product-optismart.html - If your meter is not listed, please send a picture of your meter to their Technical department. Disclaimer: Before installation please seek the permission of the owner of your electricity meter. The meter reading functionality only works with the EnviR The meter reading does not appear on the EnviR display, only in the XML output
Specifications
Operating voltage: 5v
Input Voltage (limits): 6-20V
Power Adapter: 9VDC, 300mA, 2.1mm center positive. Power can also be provided using the USB port.
Weight: 142g
Dimensions: 100mm x 76mm x 41mm
Communication: Serial communication over USB with debug output. USB can also be used for powering the prototype bridge.
Automatic Software Reset: The bridge can be reset by unplugging the power from the bridge, wait 5 seconds, then re-connect the power to the bridge. This will do a clean reset of the bridge, which will then cycle through setting up DHCP and communicating with the Current Cost broker.
Microcontroller: ATmega168
Memory: 16 KB of flash memory
EEPROM: 512 bytes (ATmega168)
RJ45 Ethernet port: The RJ45 Ethernet port has two LEDs: Link/Act and 10/100. The Link/Act LED should be on when connected. If the Link/Act LED is not ON, this usually means there is a bad network connection or bad cable.
More details about LED activity: LED: Link Activity (LINK/ACT) GREEN = link active BLINK = network activity OFF = link inactive LED: 10/100 Baud Rate / Network Speed AMBER = 100Mb OFF = 10Mb
Input Voltage (limits): 6-20V
Power Adapter: 9VDC, 300mA, 2.1mm center positive. Power can also be provided using the USB port.
Weight: 142g
Dimensions: 100mm x 76mm x 41mm
Communication: Serial communication over USB with debug output. USB can also be used for powering the prototype bridge.
Automatic Software Reset: The bridge can be reset by unplugging the power from the bridge, wait 5 seconds, then re-connect the power to the bridge. This will do a clean reset of the bridge, which will then cycle through setting up DHCP and communicating with the Current Cost broker.
Microcontroller: ATmega168
Memory: 16 KB of flash memory
EEPROM: 512 bytes (ATmega168)
RJ45 Ethernet port: The RJ45 Ethernet port has two LEDs: Link/Act and 10/100. The Link/Act LED should be on when connected. If the Link/Act LED is not ON, this usually means there is a bad network connection or bad cable.
More details about LED activity: LED: Link Activity (LINK/ACT) GREEN = link active BLINK = network activity OFF = link inactive LED: 10/100 Baud Rate / Network Speed AMBER = 100Mb OFF = 10Mb
Quantity Orders
Larger orders over and above our current stock levels (some with further discount) are nearly always possible. Please contact us with your requirement.
